CITROEN C4 PICASSO - Cruise Control

157
4
Driving
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Steering mounted controls
6. Cruisecontrolpause/resumeindication.
7. Cruisecontrolmodeselectionindication.
8. Speedsetting.
Cruise control - "CRUISE"
Systemwhichautomaticallymaintainsthespeedofthevehicleatthevalueprogrammedbythedriver,withoutanyactionontheacceleratorpedal.
Thecruisecontrolsystemcannot,inanycircumstances,replacetheneedtoobservespeedlimits,norcanitreplacetheneedforvigilanceonthepartofthedriver.
Youareadvisedtokeepyourfeetnearthepedalsatalltimes.
Switching on the cruise control requires a
minimumvehiclespeedof25mph(40km/h).
Aswellasengagementof:
- fourthgearorhigheronamanualgearbox,
- secondgearorhigherinmanualmodeon
anautomaticgearbox,
- position Donanautomaticgearbox.
Thesystemremainsactiveafterchanginggear
onvehicleswithamanualgearboxand
Stop&Start.
The cruise control is pausedbypressing
button 4orthebrakepedalorontriggeringof
theESCsystemforsafetyreasons.
Itispossibletoexceedtheprogrammedspeed
temporarilybypressingtheacceleratorpedal.
Toreturntotheprogrammedspeed,simply
release the accelerator pedal until the
programmedcruisespeedisreachedagain.
1. Selectcruisecontrolmode.
2. Set the current speed of the vehicle
astheprogrammedspeed/Lowerthe
programmedspeed.
3. Set the current speed of the vehicle
astheprogrammedspeed/Raisethe
programmedspeed.
4. Pause/resumecruisecontrol.
5. Display the list of memorised speeds or,
 Acceptthespeedsuggestedbythespeed
limitrecognitionsystem.
Displays in the instrument panel
Switchingofftheignitioncancelsany
programmedspeedvalue.
For more information on Memorising speeds,
refertothecorrespondingsection.
For more information on Speed limit
recognition and memorisation, refer to the
correspondingsection.