CITROEN C4 PICASSO - Page 87

85
3
Ease of use and comfort
C4-Picasso-II_en_Chap03_ergonomie-confort_ed01-2016
Repositioning a seat
Beforeoperatingtherearseats,check
that the outer rear seat belts are not
loose,toavoiddamagingthem.The
centrebeltmustbestowed.Fixthe
tonguesofthethreebeltstotheir
anchoragepoints.
Continuity panels
These continuity panels are not
designedtosupportaweightgreater
than30kg.
Releasing / locking the continuity panels
F Beforeunfoldingthecontinuitypanels,
checkthattheseatsinthe2
nd
row are fully
back.
F Slide the continuity panel latch upwards to
release.
F Straightenthecontinuitypanel,thenslide
thelatchdownwardstolockit.
F Ifnecessary,straightenthecontinuity
panels for the seats in the 2
nd
rowandlock
theminplace.
F Raisethebackrestandpushitrearwards
untilitlocksinposition
Each seat has a continuity panel at the bottom
ofthebackrest,thatonceunfolded:
- provides a continuous load surface in the
boot, whatever the position of the seats,
- avoidsobjectsslidingundertheseatsin
the 2
nd
row.