154
Driving
If a vehicle presence is detected by the
radar and if the speed selected is much
higher than the speed of that vehicle,
the system does not activate and the
alert message "Activation not possible,
conditions unsuitable" is displayed until
the driving conditions are safe to allow
activation of the system.
Exceeding the programmed
setting
It is possible to exceed the speed setting
temporarily by depressing the accelerator
pedal.
Then simply release the accelerator pedal to
return to the programmed speed.
If the programmed setting is unintentionally
exceeded, descending a steep hill for example,
the speed setting in the instrument panel
flashes as a warning.
Driving situations and
associated alerts
The table below describes the alerts and
messages displayed depending on the driving
situation.
The display of these alerts is not sequential.
To Next Page
Loading...
