CITROEN C4 SpaceTourer - Trip Reset; 12 Colour Instrument Panel; Display of Data on the Instrument Panel

37
1
Instruments
F When the desired trip is displayed, press
the reset button or on the end of the wiper
control stalk.
Trips "1" and "2" are independent and are used
identically.
For example, trip 1 can be used for daily
calculations, and trip 2 for monthly calculations.
12" colour instrument panel
Display of data on the instrument
panel
Trip computer data is displayed permanently
when you select the "Dials" or "Personal"
display mode.
F Press the button on the end of the wiper
control stalk to display the various tabs in
succession.
The current information tab with:
- Range.
- Current fuel consumption.
- Stop & Start time counter.
The trip "1" tab with:
- Average speed for the first trip.
- Average fuel consumption.
- Distance travelled.
The trip "2" tab with:
- Average speed for the second trip.
- Average fuel consumption.
- Distance travelled.
Trip reset
Temporary display in a specific window:
F Press the end of the wiper control stalk for
access to the information and to display the
different tabs.
In all other display modes, pressing the end of
the wiper control stalk will cause this data to
appear temporarily in a specific window.