226
In the event of a breakdown
Third brake lamp (light-emitting
diodes – LEDs)
Number plate lamps (W5W)
F Insert a thin screwdriver into one of the cut-
outs in the lens.
F Push it outwards to unclip it.
F Remove the lens.
F Change the faulty bulb.
To refit, press on the lens to clip it in place.
You can also contact a CITROËN dealer or
a qualified workshop for the replacement of
these bulbs.
For the replacement of this type of lamp,
contact a CITROËN dealer or a qualified
workshop.
Changing a fuse
Access to tooling
The extraction tweezers are fitted in the
dashboard fuses compartment.
F Unclip the cover by pulling at the top right,
then left,
F Completely remove the cover by carefully
pulling it in the axis indicated by the arrow,
F Remove the tweezers.
F Open the glove box
F Unclip the cover by pulling at the top left,
then right.
F Completely remove the cover by carefully
pulling it in the axis indicated by the arrow.
F Remove the tweezers.
Changing a fuse
Before changing a fuse, it is necessary to:
F identify the cause of the failure and correct
it,
F switch off all electrical loads,
F immobilise the vehicle and switch off the
ignition,
F identify the defective fuse using the existing
allocation tables and diagrams.
To Next Page
Loading...
