8
209
In the event of a breakdown
F Park the vehicle without obstructing any
traffic and apply the parking brake.
F Follow the safety instructions (hazard
warning lamps, warning triangle, wearing
high visibility vest, etc.) according to the
legislation in force in the country where you
are driving.
F Switch off the ignition.
F Uncoil the pipe stowed under the
compressor.
Avoid removing any foreign bodies which
have penetrated into the tyre.
F Remove the valve cap from the tyre to be
repaired, and place it in a clean area.
F Check that the compressor switch is at the
"O" position.
F Uncoil fully the electric cable, stowed under
the compressor.
Only the 12 V socket located at the front of
the vehicle can be used.
F Affix the speed limit sticker.
1. 12 V compressor, with built-in pressure
gauge.
2. Bottle of sealant, with built-in hose.
3. Speed limit sticker.
Repair procedure
Composition of the kit
F Connect the pipe from the compressor to
the bottle of sealant.
F Turn the sealant bottle over and secure it in
the notch provided on the compressor.
F Connect the hose from the bottle of sealant
to the valve of the tyre to be repaired and
tighten firmly.
F Connect the compressor's electric plug to
the vehicle's 12 V socket.
To Next Page
Loading...
