3
63
Ease of use and comfort
Rear head restraints
Relax head restraints
Never drive with the head restraints
removed; they must be fitted and correctly
adjusted.
Flat floor
Folding the seat
F Place the seats in the maximum rearwards
longitudinal position.
The rear head restraints are removable and
have two positions:
- high, the position for use,
- low, the position for storage.
To raise the head restraint, pull it upwards.
To lower it, press the lug A then push the head
restraint downwards.
To remove it:
- move the head restraint to the high position,
- press the lug A while pulling the head
restraint upwards.
To replace it:
- engage the head restraint rods in the
apertures, keeping the head restraint in line
with the seat backrest.
Depending on the version, you can fold the
sides to obtain a better comfortable position.
Each seat folds down to the floor to adapt the
boot volume as required.
"Comfort" position
F Pull strap B and push the seat back.
The backrest tilts and the cushion rotates
slightly.
Returning the seat to its initial
position
F Pull strap B and push the seat forward.
Do not allow children to operate the
seats unsupervised.
To Next Page
Loading...
