CITROEN C8 2002 - RHT-4 HW Valve Timing: Final Refitting; Refitting Components and Torque

68
CHECKING AND SETTING THE VALVE TIMING
Engines : RHT-4HW
B1EK0TVC
Refit:
- The tool [5].
- The auxiliary drive pulley
Clean the threads of the pulley screw going into the crankshaft, (Tap M16x150).
Brush the screw threads.
Nettoyer le taraudage de la screws de poulie dans le vilebrequin. (Taraud M16x150).
Brosser le filetage de la screws.
Tightening torque for the screw:
Tighten to : 7 ± 0.7 m.daN (+ LOCTITE FRENETANCH)
Angular tighten : 60° ± 6° (Outil FACOM D360).
Check the tightening: 26 ± 2.6 m.daN
Refit the auxiliary drive belt (see corresponding operation).
Remove tool [5].
Refit the closing plate, tighten to 0.7 m.daN.
Tighten the wheel bolts to 10 m.daN.
Complete the refitting in reverse order to removal.
Initialise the various ECUs.
ENGINE