OPERATION ND MA. 142.000 : (
,<,,,<~d ,rr,t,,rvc 0, ,,I<> rnrh,!ra/io?r.
Op. MA. 142.000
3
I I
”
. /.
I’,
A
D
A
2.
Pierce plug ( Cl ) :
SO,.EX rarl,,,rrrtor :
Position tool C and hold it against gun
A.
Position the gun and tool assembly against
plug ( a ) making sue that the nozzle of gun
A
is pro$erly centred against the plug, and that
the assembly is aligned (IS precisely as possible
in the axis of the plug.
-Actuate the gun, and remove it, leoving?oool C
on the carburettor.
Position and hold tool
D
against gun
A.
Position the gun and tool assembly against
plug ( CI ) moking sure that the nozzle of the
gun is properly centred against the plug, ond
that the assembly is aligned as precisely as
possible in the axis of the plug.
Actuate the gun, and screw the tool into the
plug (L.H. thread ).
- Remove the gun leaving tool
D
on the carburettor.
3.
Remove plug ( Q ) :
Load gun
A.
- screw tool C in,<, I/><, lmrk of gun
A.
- Actuate the gun to remove the plug.
Screw tool
D i,,fr, th<, bnrk
of gun
A.
Actuate the gun to remove the plug.
4.
Adiust the level of pollution :
NOTE : If the air filter has been removed, f CS
nvd 2 (.v rchirlcs 1 refit it withoot s<,crrring il
so as to carry out the adjustment.
To Next Page
Loading...
