Radio Operations
FM reception
For
enhanced
FM
performance
the
MfiGI-TUHE®
tuner includes signal actuated
stereo control and Multipath noise reduction cir-
cuits.
Changing
the
reception
area
This unit
is
initially set to USA frequency intervals
of 10kHz for
AM
and 200kHz for
FM.
When using it
outside the USA, the frequency reception range
can be switched to the intervals below.
•
Setting
the
reception area
1.
Press the [FNC] button and select the radio
mode (FM or AM).
2.
While pressing the [DISP] button, each time
you press and hold the
[SPEIANA] button for
2
seconds
or
longer,
the
reception
area
switches from inside the USA to outside the
USA or from outside the USA
to
inside the USA.
*Any station preset memories are lost when the
reception area is changed.
Listening
to
the
radio
1.
Press the [FNC] button and select the radio
mode.
2.
Press the [BND] button and select the radio
band. Each time the button
is
pressed, the
radio reception band changes
in
the follow-
ing order:
FM1
...
FM2'" FM3'"
AM
...
FM1
...
3.
Press the
[~>
] button or the [
<~]
button to
tune
in
the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek
tuning
1.
Press the [BND] button and select the desired
band (FM or AM).
* If "MANU" is lit
in
the display, press and hold
the
[BND]
button
for 1
second
or
longer.
"MANU"
in
the display goes off and seek tun-
ing is now available.
2.
Press the
[~>
] button or the [
<~]
button to
automatically seek to the next station.
When the
[~>]
button is pressed, the sta-
tion is sought
in
the direction of higher fre-
quencies; if the
[<~]
button
is
pressed, the
station is sought
in
the direction of lower fre-
quencies.
14
ADZ625
Manual
tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are
in
the step tuning mode, the fre-
quency changes one step at a time.
In
quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1.
Press the [BND] button and select the desired
band (FM or AM).
*
If
"MANU"
is
not lit
in
the display, press and
hold the [BND] button for 1 second or longer.
"MANU" lights
in
the display and manual tun-
ing
is
now available.
2.
Tune into a station.
•
Quick
tuning:
Press and hold the
[~>
] button or the [
<~]
but-
ton for 1 second or longer to manually tune
to
the desired frequency. '
• Step
tuning:
Press the
[~>]
button or the
[<~]
button to
manually tune one step at a time to the desired
frequency.
Storing
a
preset
station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions
in
memory.
Manual
memory
1.
Select the desired station with seek tuning,
manual tuning or preset tuning.
2.
Press the [M] button.
"CH"
is
lit
in
the display.
3.
Turn the [PRESET] knob either clockwise or
counterclockwise
to
select the desired preseet
memory.
4.
Press and hold the [M] button for 2 seconds
or
longer
to store
that
station into preset
memory.
Auto
store
Auto store selects up to 6 stations and auto-
matically stores them into preset memory.
If
auto
store cannot tune
in
all six stations, then it stores
the strongest stations into memory and the other
presets untouched.
1.
Press the [BND] button and select the desired
band (FM or AM).
2.
Press and hold the [SCN] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
memory.
To Next Page
Loading...
Need help?
General
