Radio
Operations
Recalling
a
preset
station
Turn the
[PRESET]
knob
either
clockwise
or
counterclockwise to recall the stored radio fre-
quency automatically.
1.
Press the [BND] button and select the desired
band (FM1, FM2, FM3 or AM).
2.
Turn the [PRESET] knob either clockwise or
counterclockwise to recall the stored station.
Preset
scan
Preset scan receives the stations stored
in
pre-
set
memory
in
order. This function
is
useful when
searching for a desired station
in
memory.
1.
Press the [SCN] button.
2.
When a desired station
is
tuned in, press the
[SCN] button again to continue receiving that
station.
Note:
• Be careful not
to
press
and
hold the [SCN} button
for
2 seconds
or
longer, otherwise the auto store
function engages and the unit starts storing sta-
tions.
Instant
station
recall
(ISR)
Instant station recall
is
a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even oper-
ates with the unit
in
other modes.
elSR
memory
1.
Select the station that you wish to store in ISR
memory.
2,
Press and hold the [ISR] button for 2 seconds
or longer.
e
Recalling
a
station
with
ISR
{n
any mode, press the [ISR] button to turn on
the radio function and tune the selected radio sta-
tion. "ISR" appears
in
the display. Press the [ISR]
button again to return to the previous mode.
CD Operations
Loading
a CD
Insert a CD into the center of the insertion slot
with the label side facing up. The CD plays auto-
matically after loading.
Notes:
• Never insert foreign objects into the
CO insertion
slot.
• When
a CO is loaded
in
the unit, never try to in-
sert
another CO in this case.
[]jCOMPACT
• Discs
not
bearing the
O~IO~~
mark
and
CO-ROMs
cannot be played
by
this unit.
• Some COs recorded in CD-R mode may
not
be
usable.
• Even when recorded
in
CD-RWmode, some COs
not be usable.
Listening
to
a CD
already
inserted
Press the [FNC] button to select the CD mode.
Play starts automatically. If no CD is loaded in
the unit, "NO DISC" appears
in
the display.
Pausing
play
1.
Press
the
[~II]
button
to
pause
play.
"PAUSE" appears in the display.
2.
To
resume CD play, press the
[~II]
button
again.
Displaying
CD
titles
This unit can display title data for user titles input
with this unit.
Press the [DISP] button to display the title.
Notes:
• Titles
of
CO-text COs cannot be displayed with this
unit.
•
If
the
CO
playing is a CO-text CO
or
no user title
has been input,
{fl NO- TTL 11 appears in the
display.
Ejecting
a CD
Press [CD EJECT] button to eject the CD. Take
it out from the ejected position.
'"
If
a
5/1
CD
(12 cm)
is
left
in
the ejected position for
15 seconds, the
CD
is
automatically reloaded
(Auto
reload).
:;:
3/1
CDs
(8
cm)
are not auto reloaded.
Be
sure
to
remove
it
when ejected.
Notes:
•
If
you
force
a CD
into
before
auto
reloading,
this
can
damage
the
CD.
;f:
The
radio mode is selected automatically 4 sec-
onds after the [CD EJECT} button is pressed.
AOZ625
15
To Next Page
Loading...
