Note:
• Be sure
to
read this chapter referring
to
the front diagrams
of
chapter
"3.
CONTROLS"
on page 5 (unfold).
Names
of
the
Buttons
and
their
Functions
[REMOTE]
• Receiver for remote control unit.
[SPE/ANA]
button
• Press to change the spectrum analyzer display.
[TAPE IN]
• Cassette tape insertion slot.
[CD IN]
• CD insertion slot.
[ISR]
button
• Recalls ISR radio station
in
memory.
Press and hold for 2 seconds or longer: Stores
current station into ISR memory (radio mode
only).
[TAPE EJECT]
button
• Ejecting a tape.
[CD EJECT]
button
• Ejecting a CD.
[DSP]
button
• Press to select the DSP menu, and to set DSP
effects to ON/OFF.
[T]
button
• Use the button to input a title
in
the CD mode.
• Press and hold the button for 1 second
or
longer to enter the adjust mode.
[M]
button
•
Use
to
change
and
store
items
in
preset
memory.
[PRESET]
knob
• Stores a station into memory or recall it directly
while
in
the radio mode.
•
In
DSP/EQ mode, use to select menu.
• In
adjust
modes,
use
to
select
items
for
adjustment.
Note:
To
operate [PRESET} knob:
•
Turn
knob about
30
deg. (adjust item will change).
•
Release
finger
(knob
will
return
to
original
position).
•
Turn
knob again (adjust item will change).
6
ADZ625
[DISP]
button
•
Switches
the
display
indication
(Main
display,sub display,clock display).
[BND]
button
• Switches the band, or seek tuning or manual
tuning while
in
the radio mode.
• Plays a first track while
in
the CD mode.
• In
tape
mode,
changes
the
side
played
(direction of tape travel).
[ROM]
button
• Performs random play while
in
the CD mode.
• Select Dolby noise reduction while
in
the tape
mode.
[RPT]
button
• Plays repeatedly while
in
the CD mode.
•
In
the tape mode, enables repeat play. When
held
depressed
for
one
second
or
more,
enables blank-skip mode.
[SCN]
button
• Performs preset scan while
in
the radio mode.
When the button is pressed and held, auto
store is performed.
• Performs scan play for 10 seconds for each
track while
in
the CD mode.
[<
.....
],
[~>]
buttons
• Selects a station while
in
the radio mode or
selects a track when listening to a
CD.
These
buttons are used to make various settings.
[FNC]
button
• Press the button to turn on the power.
Press and hold the button for 1 second or
longer to turn off the power.
• Switches the operation mode among the radio
mode, etc.
[MUTE]
button
• Turns mute on and off.
[VOLUME]
knob
• Adjust the volume by turning the knob clock-
wise or counterclockwise.
• Use the knob to perform various settings.
To Next Page
Loading...
