Tape
Operations
Loading
a tape
Load a tape into the cassette tape insertion slot.
"LOADING"
appears
in
the display and
starts
playing.
",
When a metal or chrome bias
(70/1
sec) tape
is
inserted, the metal bias setting
is
selected auto-
matically.
:;'
The cassette tape slot door shuts automatically
after inserting or ejecting a tape
("Auto
shut
door
function").
It
protects the tape mechanism from
any dust.
Listening
to a tape
already
inserted
Press the [FNC] button to select the tape mode.
Play starts automatically. If no tape is loaded
in
the unit, "NO CASS" appears
in
the display.
Pausing
play
1.
Press
the
[~II]
button
to
pause
play.
"PAUSE" appears
in
the display.
2.
To
resume tape play, press the
[~II]
button
again.
Ejecting
a tape
Press the [TAPE EJECT] button to eject a tape.
Take it out from the ejected position.
';'
The radio mode
is
selected automatically 4 sec-
onds after the
[TAPE EJECT] button
is
pressed.
Switching to the other side
of
the tape
Press the [BND] button to change tape direction
and playback.
",
The tape mechanism automatically reverses direc-
tion and engage playback
at
the end of the tape
(auto reverse).
Fast-forward/fast-backward
• Fast-forward
Press the
[~>
] button.
• Fast-backward
Press the
[<
.....
] button.
•
Canceling
FF/REW
Press the
[~II]
button.
•
Listening
to
another
source
while
using
FF
or
REW
("monitor
mode")
To
listen to the CD,
CD/MD
changer
or AM/FM
tuner while the mechanism searches, press the
[FNC] button to select the desired mode. The
mechanism will stop automatically when the end
of the tape is reached.
Note:
• Use the [FNC} button
and
select the tape function
to
resume tape playback.
APe
(Auto Program Control)
function
The APC function allows the tape to skip forward
to the beginning of the next track or rewind to the
start of the current track.
•
Skipping
forward
to
the
next
track
("
APC-
FF")
During tape playback, press the
[~>]
button
twice to fast-forward to the next track. The next
track stars playing.
•
Skipping
backward
to
the
current
track
("
APC-R
EW")
During
tape
playback,
press
the
[<
.....
] button
twice to rewind to the start of the current track.
The current track plays from the beginning.
• Canceling FF/REW APC
to
resume playback
Press the
[~II]
button.
•
Listening
to
another
source
while
using
APC
("monitor
mode")
To
listen to the CD, CD/MD
changer
or AM/FM
tuner while the mechanism searches, press the
[FNC] button to select the desired mode.
The
mechanism will stop automatically when it finds
the next track (in FF APC) or the
start
of the cur-
rent track (in
REW
APC).
Note:
• Use the [FNC} button
and
select the tape function
to
resume tape playback.
Dolby
noise
reduction
system
The Dolby noise reduction system increases the
volume level of high frequency
sounds
during
recording and sets it back to their original level
during play. This system reduces hissing noise
which is typical of cassette tapes.
:;:
Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
Press the [ROM] button to select Dolby noise re-
duction. "B
NR" lights in the display. Each time
you press the [ROM] button, the Dolby toggles
between B NR and OFF.
ADZ625
17