Tape
Operations
Intra tape scan play
The intro tape scan allows the first 10 seconds of
all the tracks on the tape to be played. This func-
tion continues on the tape until it
is
canceled.
1.
Press the [SCN] button
to
start Intro tape scan.
"SCAN" lights
in
the display.
2.
To
cancel the intro tape scan, press the
[SeN]
button again. "SCAN" goes off from the dis-
play and the current track continues to play.
* When the end of the tape is reached during
the intro tape scan, the tape mechanism auto-
matically reverses direction and continues the
intro tape scan.
* If you select another mode during the intro tape
scan, the mechanism automatically makes the
intro tape scan stop when it finds the next track
(APe
function).
Tape repeat play
The tape repeat continuously plays the current
track. This function continues automatically until
it is canceled.
1.
Press the [RPT] button. "REPEAT" lights
in
the display and the current track
is
repeated.
2.
To
cancel the repeat play, press the [RPT]
button again. "REPEAT" goes off from the dis-
play and normal play resumes.
Blank tape skip
The blank tape skip allows you to skip blank sec-
tions of tape that are over 12 seconds long.
1.
Press and hold the [RPT] button for 1 second
or longer.
"BLS"
lights
in
the display and the
mechanism fastforward to the next track se-
lection.
2.
To
cancel the blank tape skip, press and hold
the [RPT] button again. "BLS" goes off and
normal play resumes.
Notes:
The
APe,
intra tape scan, tape repeat
and
blank
skip may not work properly with tapes
of
the follow-
ing qualities:
•
Tapes
on which the recording level
is
too
low.
•
Tapes
on which there is much noise between se-
lections.
•
Tapes
on which there are long pauses
in
the middle
of
selections.
• Tapes on which there are less than
4 seconds
of
blank space between selections.
18
ADZ625
To Next Page
Loading...
Need help?
General
