CD/MD Changer Operations
CD/MD
changer
functions
When
an
optional CD/MD changer
is
connected
through the CeNET cable, this unit controls all
CD/MD changer functions. This unit can control
a total of 2 changers (MD and/or CD).
Press the
[FNC] button and select the CD(MD)
changer mode to start play. If 2 CD(MD) chang-
ers are connected, press the
[FNC] button to
select the CD(MD) changer for play.
* If "NO MAGA" appears
in
the display, insert the
magazine into the CD changer. "CHECK" appears
in
the display while the player loads (checks) the
magazine.
*
If
"NO DISC" appears
in
the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
* If "NO DISC" appears
in
the display, load MDs into
the MD changer.
CD"ROM
dlscsal'1dCD"R
discs
cannot
be
played in
the
CD changer.
Pausing
play
1.
Press
the
[~II]
button
to
pause
play.
"PAUSE" appears
in
the display.
2.
To
resume play, press the
[~II]
button again.
Displaying
CD
titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
*Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
• When
connected
to
CDC655z
or
CDC1255z
Press the [DISP] button to display the title.
• When
connected
to
CDC655Tz
1.
Press the [DISP] button to display the title.
2.
Each time you press and hold the [DISP] but-
ton for 1 second or longer, the title display
changes
in
the following order:
User title (disc)
~
CD-text title (disc)
~
CD-
text title (track)
~
user title (disc)...
Notes:
•
If
the CD playing is
not
a CD-text CD
or
no user
title has been input, "USER TTL" appears in the
display
22
ADZ625
•
If
a CD-text CD is
not
input its disc title
or
a track
title, "TEXTIJITTL"
or
"TEXTflTTL"
appears
in
the
display
Switching
disc
titles
and
track
titles
(MD)
This unit can display disc titles and track titles
already entered on MOs. Titles up to 128 char-
acters long can
be
displayed
by
scrolling the titles.
* Titles cannot be entered for MDs with this unit.
1.
Press the [DISP] button to display the title)
The disc title or track title
is
displayed.
2.
Each time you press and hold the [DISP] but-
ton for 1 second or longer, the display toggles
k
between the disc title and the track title.
~,
Note:
•
If
an MD is
not
input its disc title
or
a track title, "IJI
TITLE"
or
'fl
TITLE" appears
in
the display
Procedure
to
scroll
a
title
Set "AUTO SCROLL" to "AUTO" or "OFF". (The
factory
default
setting
is "AUTO".
Refer
to
subsection
"Adjusting
the way
of
title
scrolling"
in
section "Operations Common
to
Each Mode".)
• When
set
to
"AUTO"
The title
is
automatically kept scrolling.
• When
set
to
"OFF"
Press the [T] button to scroll the title.
Selecting
a CD/MD
Turn the [PRESET] knob
either
clockwise or
counterclockwise to select a CD or MD.
* Use to select the number of the disc loaded, and
to
start play.
Selecting
a
track
• Track-up
1.
Press the
[~>
] button to move ahead to the
beginning of the next track.
2.
Each time you press the
[~>]
button, the
track advances ahead to the beginning of the
next track.
• Track-down
1.
Press the
[<
......
] button to move back to the
beginning of the current track.
2.
Press the
[<
......
] button twice to move to the
beginning of the previous track.
To Next Page
Loading...
