Operation Common
to
Each Mode
5.
Press the
[~>
] button or the
[<
......
] button to
move the cursor.
6.
Press the [DISP] button to select a character.
Each time you press the [DISP] button, the
character changes
in
the following order:
Capital letters
-+
Small letters
-+
Numbers/
Symbols
-+
Capital letters
...
7.
Turn the [VOLUME] knob either clockwise or
counterclockwise
to
select
the
desired
character. Pressing the
[~>]
button moves
the cursor
to
the next character; pressing the
[<
......
]button moves the cursor to the previous
character.
8.
Repeat steps 5 to 7 to enter up to 10 charac-
ters for the title.
9.
Press and hold the
[~II]
button for 2 sec-
onds or longer to store the title into memory
and cancel title input mode.
Clearing titles
1.
Playa
CD or a CD
in
a CD changer, or tune a
radio station or TV station that you want to
clear the title for.
2.
Press the [DISP] button and display the sub-
title.
3.
Press the
[T]
button. "TITL" appears
in
the dis-
play and the display switches to the title input
display.
4.
Press the [BND] button.
5.
Press and hold the
[~II]
button for 2 sec-
onds or longer to clear the title and cancel
the title input mode.
Message display
When the unit is powered on or off, a message is
displayed. The user can turn this message dis-
play
on
or off.
i,
:,:
The factory default setting is "ON".
1.
Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2.
Press the
[~>
] button or the
[<
......
] button to
select "MESSAGE".
3.
Turn the [VOLUME] knob clockwise to set the
message display to "ON", or turn the [VOL-
UME] knob counterclockwise to set the mes-
sage display to "OFF".
4.
Press the [T] button to return to the previous
mode.
Clock function
•
Time
matching
Regarding the "CLOCK INDICATION"...
The unit indicates the clock when the car engine
is
running (when ACC is ON).
The clock is of 12-hour indication.
1.
Press the [T] button continuously (for about 1
second).
"ANA_SENS"
is indicated.
2.
Press the
[<
......
] button or the
[~>]
button
and select
"CLOCK
I)"
3.
Press the
[~II]
button to indicate the clock.
The clock indicates "AM 12:00" and turns to
the "time setting" mode.
4.
Press the
[<
......
] button or the
[~>]
button
and select "HOUR" or "MINUTE" may adjust
items which are flashing.
5.
Press the
[~>]
button or the
[<
......
] button
and match the time.
6.
Press the
[~II]
button.
7.
Press the [T] button.
The unit returns to the original indication.
Triggered audio mute for cellular
telephones
This unit requires special wiring to mute the au-
dio signal automatically when a cellular telephone
rings
in
the car.
:"
This function is not compatible with all cellular tele-
phones.
Contact
your
local
authorized
Clarion
dealer for information on proper installation and
compatibility.
Adjusting the way
of
title scrolling
There are 3 ways for scrolling a title
in
the dis-
play.
You
can select the way you prefer.
:;:
The factory default setting is "AUTO".
1.
Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2.
Press the
[~>
] button or the
[<
......
] button to
select "SCROLL".
3.
Turn
the
[VOLUME]
knob
to
change
the
display. Each time the
[VOLUME]
knob is
turned either clockwise or counterclockwise,
the display changes between the 2 display
methods available.
4.
Press the [T] button to return to the previous
mode.
ADZ625
21
To Next Page
Loading...
