DSPIEQ Operations
Select
DSP Menu
About DSP functions:
The Digital Sound Processor use digital signal
processing to allow the creation of simulated
audio
environments
inside your car,
without
degradation of the sound.
1.
Press the [DSP] button. The DSF indicator will
flash.
2.
Turn the [PRESET] knob either clockwise or
counterclockwise to select the DSP menu.
• DSP
menus
STADIUM:
Large stadium without roof or walls.
HALL
: Large concert hall.
CLUB
: Club with strong bass.
CHURCH : Church with a vaulted ceiling.
L-ROOM : Listening room
in
a home.
3.
Press the [DSP] button to return to the original
mode.
To
set
DSP
effects
to
ON/OFF
Hold the [DSP] button depressed for 1 second
or more.
Each time the [DSP] button
is
held depressed,
the function alternates between ON and
OFF.
When the DSP function
is
ON, the DSF indicator
lights.
To
adjust
EFFECTS
About sound effects:
"Effects"
refers
to
the
characteristic
reverberations
and
echoes
that
occur
when
sound
is
bounced off walls or other surfaces. This
unit allows the amount of echo or reverberation
to
be
adjusted.
1.
Press the [DSP] button. The DSF indicator
flashes.
2.
Turn the [PRESET] knob either clockwise or
counterclockwise to select the desired DSP
menu adjust item.
3.
Hold the [T] button depressed for 1 second or
more.
4.
Turn the [VOLUME] knob either clockwise or
counterclockwise to adjust the effect.
• The amount of effect added can be adjusted
within the range 0-70%.
5.
Press the [T] button to return to the DSP
menu. The selected DSP menu will appear.
6.
Press the [DSP] button to return to the original
mode.
Selecting
the EO
menu
About the EO function:
The Equalizer allows correction and modification
of the frequency response for selected frequency
ranges, thus allowing the creation of your own
unique sound.
1.
Press the [EO] button.
2.
Turn the [PRESET] knob either clockwise or
counterclockwise to select the desired EO
menu.
• EO
menus
IMPACT :
Low
and
high
frequencies
emphasized.
B-BOOST
: Low frequencies emphasized.
ACOUSTIC:
Medium
frequencies
(vocals)
emphasized.
FLAT : Original sound.
3.
Press the [EO] button to return to the original
mode.
Setting
EO
effects
to
ON/OFF
Hold the [EO] button depressed for 1 second or
more.
Each time the [EO] button
is
held depressed
in
this
way,
the function alternates between ON and
OFF.
When the EO function
is
enabled (ON), the
G.EO indicator lights.
AOZ625
19
To Next Page
Loading...
Need help?
General
