TV Operations
Auto store
Auto store selects 6 TV stations automatically
and stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored
in
memory remain and
only the strong stations are stored into memory.
1.
Press the [BND] button and select the desired
TV band
(TV1
or TV2).
2.
Press and hold the [SCN] button for 2 sec-
onds or longer. The stations with good recep-
tion are stored automatically to the preset
memory.
Preset scan
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function
is
useful for searching
for desired TV station
in
memory.
1.
Press the [SCN] button.
2.
When the desired station
is
found, press the
[SCN] button again to remain tuned to that
station.
Note:
• Do
not
press
and
hold the
[SeN}
button for 2 sec-
onds
or
longer. Doing so will trigger the auto store
function
and
start storing stations into memory
Setting the TV diver
You
can change the reception setting for the TV
antenna connected to the TV tuner.
1.
Press and hold the [T] button for 1 second or
longer to switch to the adjustment selection
display.
2.
Press the
[<~]
button or the
[~>]
button to
select "TV DIVER".
3. Turn the [VOLUME] knob clockwise to set to
"ON" or counterclockwise
to
set to "OFF".
eON:
Sets reception emphasizing the visual.
eOFF:
Sets the diver setting to
OFF.
4.
Press
the
[T]
button to return to the previous
mode.
ADZ625
25
To Next Page
Loading...
