ARX8570z 17
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for radio stations and
CDs. The numbers of titles that can be entered
for each mode are as follows.
1. Press FNC button 3 to select the mode you want
to enter a title (radio, CD changer or TV).
∗ Titles cannot be entered for MDs with this unit.
2. Select and play a CD in a CD changer or tune
to an appropriate TV or radio station.
3. Press DISP button 0 and display the sub-
title.
4. Press TITLE button 4. “TITL” appears in the
display and the cursor position flashes.
5. Press the right or left side of SEARCH button
$ to move the cursor.
6. Press DISP button 0 to select a character.
Each time you press DISP button 0, the char-
acter changes in the following order:
Capital letters ➜ Small letters ➜ Numbers ➜
Symbols ➜ Umlaut ➜ Capital letters...
7. Turn the Rotary knob % to select the desired
character. Turning the Rotary knob % clock-
wise moves the cursor to the next character;
turning it counterclockwise moves the cursor
to the previous character.
8. Repeat steps 5 to 7 to enter up to 10 charac-
ters for the title.
9. Press and hold ENT button 2 for 2 seconds
or longer to store the title into memory and
cancel title input mode.
Clearing titles
1. Play a CD in a CD changer or tune a radio
station or TV station that you want to clear
the title for.
2. Press DISP button 0 and display the sub-
title.
3. Press TITLE button 4. “TITL” appears in the
display and the display switches to the title
input display.
4. Press BND button @.
Other Handy Functions
CD changer mode Number of titles
CDC655z connected 60 titles
CDC655Tz connected 100 titles
CDC1255z connected 50 titles
Mode Number of titles
Radio mode 30 titles
TV mode 15 titles
5. Press and hold ENT button 2 for 2 seconds
or longer to clear the title and cancel the title
input mode.
Adjusting the display contrast
You can adjust the display contrast according to
the angle of installation of the unit.
∗ The factory default setting is “6”. (Adjustment level:
1 to 11)
1. Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
$ to select “CONTRAST”.
3. Press ENT button 2.
4. Turn the Rotary knob % clockwise or coun-
terclockwise to adjust the contrast.
5. Pressing ENT button 2 returns to the adjust-
ment selection display.
6. Press ADJ button 4 to return to the previous
mode.
Setting the SEARCH button illumi-
nation color (Prism function)
The change in the SEARCH button illumination
color according to the unit operating state is
called the “Prism function”. You can set the illu-
mination pattern you prefer.
∗ The factory default setting is “PATTERN 1”.
1. Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
$ to select “PRISM KEY”.
3. Press ENT button 2.
4. Turn the Rotary knob % clockwise or coun-
terclockwise to set the illumination pattern.
Each time you turn the Rotary knob %, the
illumination pattern changes in the following
order:
PATTERN 1 ➜ PATTERN 2 ➜ OFF ➜ PAT-
TERN 1...
PATTERN 1:
The color changes for each function mode,
station tuning, scanning, and other operations.
PATTERN 2:
In addition to the changes in Pattern 1, the
color changes according to the audio level.
OFF:
The color changes according to the function
mode.
To Next Page
Loading...
Need help?
FM Tuner
Audio
