Basic Operations
Note:
•
Refer
to
the diagrams
in
"3. CONTROLS"
when reading this chapter.
A
CAUTION
When
the
unit
Is
turned
on,
starting
and
stopping
the
engine
with
Its
volume
raised
to
the
maximum
level
may
harm
your
hearing
.
Be
careful
about
adjusting
the
volume
.
Power
on
I
off
Notes:
• Start
the engine before using this unit.
•
Be
careful about using this unit for a
long
time without running the engine.
If
you
drain the car's battery too far, you may not
be
able
to
start the engine and this can
reduce the service
life
of
the battery.
1.
Start
the engine. The power button
I
knob
illumination on the unit
will light
up
.
~
EngineON
~p
osition
2. Press the
[
SAC
I
<!)
]
button
on
the front
panel or the remote control
to
turn
on
the
power under standby mode. The unit goes
back to the
last
status after power on.
3. Press and
hold
the
[
SAC
I<!)]
button on
the front panel or the remote control to
turn off the power.
Mute
Press the [MUTE] button
on
the remote
control to mute the volume from the unit.
Note.
Doing
the
operat
io
n above again or adjusting
volume
will
release muting.
Volume
adjustment
Rotate the
[VOLUME]
knob
on
the front
panel
or
press the [
.&
I
or [
..,..
I
button on the
remote
control.
The adjustable range of vo
lum
e is
0
to
40.
A
CAUTION
While
driving
, keep
the
volume
level
at
which
external
sounds
can
still
be
heard.
Playing
source
selection
Press
[SAC
I<!)]
button
on
the front panel or
remote control repeatedly to choose desired
playing source.
Note
:
Playing source selection means selecting
which mode,
suc
h as
DISC
mode,
RADIO
mode and AUX mode.
Display
system
time
Press the [DISP]
button
on
the front panel or
[DISP] button on the remote control to switch
the display information from clock, station
information (radio mode), or track information
(CD mode).
RESET
Note:
•
When the [RESET] butt
on
is pressed,
preset radio stations, titles, etc. stored
in
memory are cleared.
RESET
System Setup
In
any mode. press and hold [DISP) button
to
enter system setup. Press [
...,.
I
or [
~
I
button
to
select options, rotate the
[VOLUME]
knob to
adjust.
CLOCK
Press
the
[VOLUME]
knob
to
enter
clock
setting mode. rotate the [VOLUME]
knob to
set
clock.
press [
...,.
J
or
[
~
I
button to
select
ho
ur
or
minute, press
and
hold
t
he
[VOLUME]
knob to confirm.
DX/LO (RADIO
mode)
Rotate the
[VOLUME]
knob to choose radio
local
or distant at
RADIO
mode.
•
LO
: Only
stations with strong signal can
be
received.
•
DX:
Stations
with strong and weak
signals
can
be
received.
AUX
SENS (AUX
mode)
Rotate the
[VOLUME]
knob to choose AUX
Input
sensitivity
LOW, MID
or
HIGH
at
AUX
mode.
PARENTAL
PASSWORD (SirlusXM
mode)
Change parental password.
Original
code
is
·
oooo
·
LOCK
CH
(SirlusXM
mode)
Lock the current channel
UNLOCK
CH
(SirlusXM mode)
Unlock
cu
rr
ent locked channel.
UNLOCK
ALL
CH
(SirlusXM
mode
)
Unlock
all
parental locked
channels.
ALERT
:
ON/OFF
(SiriusXM
mode)
Activate interruption by Artist and
Song
alert
DELETE
ALL
ALERT
(SirlusXM
mode)
Delete saved alert items for artist and song.
SELECT
(BT
mode)
This
"
SELECT"
menu
is
intended
to
automatically paired
by
selec
ting a
mobile
phone was stored.
This unit can store t
hr
ee
mobile phones. The
mobile phone
will
be
stored
in
paired order
to the unit. The mobile phone can
be
stored
up to three. The fourth
mobile
phone can n
ot
be
stored.
If
you want
to
store a fourth mobile
phone,
please
delete unwanted
mobile
phone
from "DELETE" menu.
1.
Rotate the [VOLUME]
knob
to
choose the
pair
mobile
phone name from the pairing
list.
2.
Press and
hold
the
[VOLUME] knob to
confirm.
DELETE
(BT
mode)
1. Rotate
the
[
VOLUME
]
knob
to
choose
the
paired
mob
ile phone name from the
pairing
list.
2.
Press
and
ho
ld
the
[VOLUME]
knob
to
confirm.
DISCON
(BT
mode)
Disconnect
curren
tly
connected
mobi
le
phone.
1.
Rotate
the
[
VOLUME]
knob
.
mobile
phone displays are currently connected.
2. Press
and
hold
the
[VOLUMEI
knob
to
disconnect.
MIC
SEL
(BT
mode)
Rotate
the
[VOLUME]
knob
to
choose
Microphone EXTERNAL or INTERNAL.
MIC GAIN
(BT
mode)
Rotate
the
[VOLUME)
knob
to
choose Mic
gain:
-5
,-4,-3,
-2
,
-1
,0,1, 2. 3, 4. 5.
You
can
change
the
gain of
MIC
when a
telephone partner cannot hear your voice.
TONE
SEL
(BT
mode)
You can get
mobile
phone ring tone from the
speaker.
Rotate
the
[VOLUME
]
knob
to
choose
AUTO
or
INTERNAL.
• AUTO:
Mobile phone ring tone from the speaker.
• INTERNAL:
The unit original ring tone from the speaker.
AUTO
ANS
(BT
mode)
To answer incoming
calls automatically.
Rotate
the
[VOLUME]
knob
to
choose
AUTO ANS ON
or
OFF.
AUTO CON: ON/OFF
(BT
mode)
Automatically
connects
the
mobile
phone
was
last
connected.
Rotate
the
[
VOLUME]
knob
to
choose
AUTO CON ON
or
OFF. ·
PIN CODE
Rotate
and
press
the
[VOLUME]
knob
to
choose
a 4-
digit
password.
Press
the
[
VOLUME]
knob more than 1
seconds
to
confirm.
The
PIN CODE default
setting
is·
0000 •.
CZ302
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
