Radio Mode Operations
Listening
to
the
radio
1.
Press the [SRC] button and select the Radio
mode, then the radio will be on.
2.
To
select a preset band, press the [BND] but-
ton, and then select one of the preset bands
such as FM1, FM2, FM3 or AM.
Every time the [BND] button
is
pressed, the
band switches
in
the following order:
F1
~
F2
-7
F3
~
AM
~
F1
...
3.
Press the [
.....
,
~]
button to tune
in
the
desired station.
Seek
tuning
1.
Press the [BND] button and select the desired
band (FM or AM).
* If "MANU" is lit
in
the display, press and hold
the [BND] button for 1 second or longer.
"MANU"
in
the display goes off and seek tuning
is now available.
2.
Press the [
.....
,
~]
button to start automatic
station tuning.
When the
[~]
button
is
pressed, search will
be performing
in
the direction of higher fre-
quencies. When the [
.....
] button is pressed,
search will be performed
in
the direction of
lower frequencies.
Manual
tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are
in
the step Tuning mode, the fre-
quency changes one step at a time.
In
the quick
Tuning mode, you can quickly tune the desired
frequency.
1.
Press the [BND] button and select the desired
band (FM or AM).
*
If
"MANU" is not lit
in
the display, press
and
hold
the [BND] button for 1 second or longer.
"MANU" is lit
in
the display and manual tuning
is now available.
2.
Tune into a station.
•
Quick
tuning:
Press and hold the [
~
,
~]
button for 1 sec-
ond or longer to begin station tuning.
• Step
tuning:
Press the
[~,
~]
button to perform manual
tuning.
Preset memory
function
Preset memory function can store
up
to 24 sta-
tions:
Six stations for each of
FM
1,
FM2, FM3 and AM.
Manual memory
function
1.
Press the [BND] button and to select a band
you want to store
in
the memory.
2.
Press the
[~,
~]
button to tune into a
desired station.
3.
Press and hold one ofthe [DIRECT] buttons for
2 seconds or longer to store the current station
into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned
in
sequentially. If 6
receivable stations cannot be received, a previ-
ously stored station remains un-overwritten at
the memory position.
1.
Press the [BND] button and select the desired
band (FM or AM).
2.
Press and hold the
[~II]
button for 2 seconds
or longer. The stations with good reception are
stored automatically to the preset channels.
"A-STORE" will be displayed.
Preset scan
Preset scan receives the stations stored
in
preset
memory
in
order. This function is useful when
searching for a desired station
in
memory.
1.
Press the
[~II]
button.
2.
When a desired station is tuned
in,
press the
[~II]
button again to continue receiving that
station. "P-SCN" will be displayed and "SCN"
indicator lights
in
the display.
Note:
• Be carefuI not to press and hold the
[~II]
button
for 2 seconds or longer, otherwise the auto store
function is engaged and the unit starts storing sta-
tions.
12 DB175MP
To Next Page
Loading...
Need help?
General
