Note: Be sure to read this chapter referring to the front diagrams of
chapter "2. CONTROLS"
on
page
3.
Basic Operations
Be
sure
to
lower
the
volume
before switch-
ing
off
the
unit
power
or
the
ignition
key. The
unit
remembers
its
last volume setting.
If
you
switch
the
power
off
with
the
volume up,
when
you
switch
the
power
back on,
the
sud-
den loud
volume
may
hurt
your
hearing and
damage
the
unit.
Turning
on/off
the
power
Note:
• Be careful about using this unit for a long time
without running the engine. If you drain the car's
battery too much, you may not
be
able to start the
engine and this can reduce the service life of the
battery.
1. Press the [SRC] button.
2.
The illumination and display
on
the unit light
up.
The unit automatically remembers its last
Operation mode and will automatically switch
to display that mode.
3.
Press
and
hold the [SRC] button for 1 second
or longer to turn off the power for the unit.
Selecting a
mode
1. Press the [SRC] button to change the Opera-
tion mode.
2.
Each time you press the [SRC] button, the Op-
eration mode changes
in
the following order:
Radio mode -+ CDIMP3IWMA mode
-+
AUX mode -+ Radio mode
...
Note:
•
If
the
CD
mode is selected when
no
disc is inserted,
the display shows "NO DISC".
Switching
the
display
Press the
[D]
button
to
select the desired display.
Each time
you
press the
[D]
button, the display
switches
in
the following order:
• Radio mode
Main Display -+ Clock Display -+ Main Display
...
• CD mode
Main Display (Track No., Play Time) -+
Clock
Display -+ Main Display...
•
MP3IWMA
mode
Main-1 Display (Track No., Play Time)-+
Main-2 Display (Folder No., Play Time)-+
Track-+ Folder -+Title -+
Album
-+
Artist
-+
~
Clock
Display -+ Main-1 Display...
• AUX mode
Main Display -+ Clock Display -+ Main Display
...
* Once selected, the preferred display becomes the
display default. When a function adjustment such
as volume is made, the screen will momentarily
switch to that function's display, then revert back
to the preferred display several seconds after the
adjustment.
Adjusting
the
volume
Turning the [ROTARY] knob clockwise increases
the volume; turning
it
counterclockwise decreas-
es
the volume. "VOL XX" will
be
displayed where
"XX"
is
the volume level from 0 (minimum) to
33
(maximum).
* The factory default setting for volume is "VOL
13".
Sound mode adjustments
1. Press the [.1'] button
to
enter the Sound Adjust-
ment mode.
2.
Press the [
.....
,
~]
button to select the
"item name".
"Z-EHCR"
~
"BASS"
~
"TREBLE"
~
"BALANCE"
~
"FADER"
DB175MP 9
To Next Page
Loading...
Need help?
General
