CD/MP3IWMA Mode Operations
MPEG
1,
2 and 2.5 - Layer 3
MPEG-1 : 32,
44.1,48
MPEG-2 : 16, 22.05, 24
MPEG-2.5 :
8,
11.025, 12
Bit-rate (kbps) MPEG-1 : 32 - 320
MPEG-2 : 8 - 160
MPEG-2.5 : 8 - 160
VBR
Sampling rate 48,
44.1
, 32
(kHz)
Bit-rate (kbps) 32 - 192
Folder Level Limit : 8 Level
Max. Folder Support : 128
Max. Files Support : 254
Folder Name : Max. 28 Characters
File Name : Max. 28 Characters
• File extensions
• Always add a file extension ".MP3" or ".WMA"
to MP3 or WMAfile by using single characters
letters. If you add a file extension other than
specified or forget to add the file extension, the
file cannot be played.
• Logical
format
(File system)
1.
When writing MP3IWMAfile
on
a CD-R disc or
CD-RW disc, please select "IS09660 level
1, 2
or
JOLIET
or
Romeo" as the writing software
format. Normal play may not be possible if the
disc is recorded on another format.
2.
The folder name and file name can be dis-
played as the title during MP3IWMA play but
the title must be within 28 single byte alphabeti-
cal letters and numerals (including
an
exten-
sion) respectively.
3.
Do not affix a name to a file inside a folder
having the same name.
• Folder
structure
1.
A disc with a folder having more than 8 hierar-
chical levels will be impossible.
14 DB175MP
• Number
of
files
or
folders
1.
Up to 254 files can be recognized per folder.
Up to 254 files can be played.
2.
Tracks are played
in
the order that they were
recorded onto a disc. (Tracks might not always
be played
in
the order displayed on the PC.)
3.
Some noise may occur depending on the type
of encoder software used while recording.
CD-DAlMP3IWMA selection on
multi-session
CD
1.
If a multi-session CD which contains CD-DA
and MP3IWMAfiles is being inserted, user can
select either CD-DA or MP3IWMA files to be
played.
2.
Default setting for files to be played on multi-
session CD is CD-DA files.
3.
Press the [BND] button for more than 1 second
will toggle between selection of CD-DA and
MP3IWMA files to be played.
4.
When CD-DAtype
is
selected, display will show
"M-SESS" then "CD". When MP3IWMA type
is selected, display will show "M-SESS" then
"MP3".
5.
CD-DAlMP31WMAselection function can only
be performed
in
CD/MP3IWMA mode. It will
only activate after re-insert CD. For example,
current setting is CD-DA type. Press [BND]
button for more than 1 second to set MP3IWMA
type. User has to eject CD and re-insert again
as to play MP3IWMA files.
6.
Types of recording that can be played are as
follows.
~g
Set
to
CD
Set
to
MP3IWMA
Mixed with CD-DA
Play CD-
Play MP3IWMA
and MP3IWMA DA
type tracks
CD-DA type track Play CD-
Play CD-DA
only DA
MP3IWMA type
Play
MP31
Play MP3IWMA
track only WMA
7.
When a Mixed mode CD is loaded and CD is
set, the track to be played first is MP3IWMA
file data and no sound is heard.
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3IWMA
type, the CD cannot be played normally
in
some
cases.
To Next Page
Loading...
Need help?
General
