Clarion DXZ728R User Manual

DXZ728R 25
English
Selecting a track
●Track-up
1. Press the [d] button to move ahead to the
beginning of the next track.
2. Each time you press the [d] button, the
track advances ahead to the beginning of the
next track.
●Track-down
1. Press the [a] button to move back to the
beginning of the current track.
2. Press the [a] button twice to move to the
beginning of the previous track.
Fast-forward/fast-backward
●Fast-forward
Press and hold the [d] button for 1 second or
longer.
●Fast-backward
Press and hold the [a] button for 1 second or
longer.
Top function(CD)
The top function plays from the first track (track
No. 1) of the disc.
●When playing a disc 1 to 6
Press the [DIRECT] button (1 to 6) with the
same number as the CD playing.
●When playing a disc 7 to 12 (only when a
12 disc CD changer is used.)
Press and hold for 1 second or longer the [DI-
RECT] button (1 to 6) with the same number as
the CD playing.
∗ If a CD is not loaded in a slot of magazine, pressing
the [DIRECT] button corresponding to its disc num-
ber is invalid.
Top function(MD)
The top function plays from the first track (track
No. 1) of the disc. Press the [DIRECT] button (1
to 6) with the same number as the MD playing.
∗ If an MD is not loaded in a slot of MD changer, press-
ing the [DIRECT] button corresponding to its disc
number is invalid.
Scan play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This func-
tion continues on the disc until it is cancelled.
∗ The scan play is useful when you want to select a
desired track.
1. Press the [PS/AS] button to start track scan-
ning. “SCN” lights in the display.
2. To cancel the scan play, press the [PS/AS]
button again. “SCN” goes off from the display
and the current track continues to play.
Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the cur-
rently selected CD (MD) changer. This function
continues automatically until it is cancelled.
∗ Disc scan play is useful when you want to select a
desired CD (MD).
1. Press and hold the [PS/AS] button for 1 sec-
ond or longer. “DISC” and “SCN” light in the
display and disc scan play starts.
2. To cancel disc scan play, press the [PS/AS]
button again. “DISC” and “SCN” go off from
the display and the current track continues to
play.
Repeat play
Repeat play continuously plays the current track.
This function continues automatically until it is
cancelled.
1. Press the [AF] button. “RPT” lights in the dis-
play and the current track is repeated.
2. To cancel repeat play, press the [AF] button
again. “RPT” goes off from the display and
normal play resumes.
Disc repeat play
After all the tracks on the current disc have been
played, disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is can-
celled.
1. Press and hold the [AF] button for 1 second
or longer. “DISC” and “RPT” light in the dis-
play and disc repeat play starts.
2. To cancel disc repeat play, press and hold
the [AF] button again. “DISC” and “RPT” go
off from the display and normal play resumes
on the current track.
CD/MD Changer Operations

Clarion DXZ728R Specifications

Radio Section

FM receiving frequency range	87.5 to 108 MHz
MW receiving frequency range	531 to 1602 kHz
LW receiving frequency range	153 to 279 kHz

CD Player Section

Frequency response	5 Hz to 20 kHz
Signal to noise ratio	100 dB
Dynamic range	95 dB

General

Output power	4 x 31 W
Power supply voltage	14.4 V DC
Power consumption	Less than 15 A

Weight and Dimensions

Main unit weight	1.6 kg
Main unit dimensions	178 W x 50 H x 155 D mm
Remote control unit weight	30 g