Why is my USB device not recognized by my Clarion Receiver?
If your Clarion Receiver does not recognize the USB device, the USB device might be damaged. Disconnect the USB device and reconnect. If the device is still not recognized, try replacing it with a different USB device.
What to do if USB device cannot be inserted into Clarion M505?
If you cannot insert a USB device into your Clarion Car Receiver, the USB device may have been inserted incorrectly. Reverse the connection direction and try again. If the USB connector is broken, replace it with a new USB device.
Why does my Clarion Receiver display 'CHEK TUNER'?
The 'CHEK TUNER' message on your Clarion Receiver indicates a problem with the SiriusXM tuner connection. Check the SiriusXM tuner connection on the back of the unit to ensure it's correctly connected.
What to do if there is no sound heard with the display 'No File' shown on Clarion M505 Car Receiver?
If you hear no sound and the display shows 'No File' on your Clarion Car Receiver, it means no MP3/WMA file is stored on the USB device. Store these files properly on the USB device.
What to do if Clarion M505 Car Receiver does not recognize USB device?
If your Clarion Car Receiver does not recognize the USB device, disconnect the USB device and reconnect it. If the device is still not recognized, try replacing it with a different USB device.
What does 'CH UNAVAIL' mean on my Clarion M505 Car Receiver?
If your Clarion Car Receiver displays 'CH UNAVAIL', the channel is not a valid SiriusXM channel. The channel number may have been entered incorrectly, or the channel was removed from the SiriusXM channel lineup.
Why is my Clarion Receiver displaying 'NO SIGNAL'?
The 'NO SIGNAL' message on your Clarion Receiver indicates that the antenna doesn't have a clear view of the southern sky. Ensure the vehicle is outside and the magnetic antenna is mounted on the outside of the vehicle for the best reception.
What to do if my Clarion Receiver unit cannot power on?
If your Clarion Receiver unit cannot power on, it's likely due to a blown fuse. Check the unit fuse and the car battery fuse, and replace any blown fuses with new fuses of the correct rating.
Why is there no audio or low audio output from my Clarion Receiver?
There could be several reasons for low or no audio output from your Clarion Receiver: * The audio output connection may be improperly connected: Check the wiring and correct it. * The volume might be set too low: Increase the volume level. * The speakers could be damaged: Replace the speakers. * The volume balance could be heavily biased: Adjust the channel balance to the center position. * Speaker wiring might be in contact with the car's metal parts: Insulate all speaker wiring connections.
Why does my Clarion M505 reset itself when the engine is off?
If your Clarion Car Receiver resets itself when the engine is off, there may be an incorrect connection between ACC and Battery. Check the wiring and correct it.
General| Brand | Clarion |
|---|---|
| Model | M505 |
| Category | Car Receiver |
| Language | English |
Essential safety advice and warnings for operation and handling.
FCC and Industry Canada compliance statements.
Diagram and explanation of the unit's front panel controls.
Detailed explanation of each button's operation and function.
Explains operations of various buttons on the remote control.
Solutions for general unit problems and USB device recognition/playback issues.
Explanations of various advisory messages related to SiriusXM tuner and channels.
Solutions for Bluetooth pairing and audio quality problems.
Precautions before starting, general cautions, and site considerations for installation.
Step-by-step guide for mounting and securing the main unit.
Details on installing the unit using mounting brackets or frames.
Detailed connections for Antenna, Wired Remote, SiriusXM, Steering Wheel Controls, and main power/speaker leads.
To Next Page
