Clarion NX405 - Selecting a Location on the Map

3.1.8 Selecting a location on the map
To select a map location, perform the following steps:
1. Locate your destination on the map. Move and scale the map as necessary.
2. Tap the location that you want to select as your destination. The cursor ( ) appears there.
3. (optional) If needed, tap
to list the Places near the selected point or to save this location.
Tip!
If you already have a planned route, tap
and to add the selected
location to your route.
4. Tap to select the cursor as the destination.
5. The route is calculated and the map appears showing the entire route, where you can check route
information and route alternatives. Tap
to modify the route parameters, or tap
to start your journey.
50 Clarion NX405 English