3.1.9 Planning a Multipoint Route
To build your route destination-by-destination, perform the following steps:
1. Tap
on the Navigation view to access the Navigation menu.
2. Tap
.
3. There is only one line in the list of route points, the starting point of the route, which is normally the
current GPS position.
4. Tap
to select the destination.
5. The New Route to... screen appears, where you can select the destination of the route the same
way as described in the previous sections.
6. When the selected location appears on the map, tap
and the list returns. If
needed, you can add further intermediate destinations.
Clarion NX405 English 51
To Next Page
Loading...
