Clarion NX702 - 6 System Setup

13
English
NX702
At all mode, long press [ MENU ALL ]
button to enter main source menu. Touch
[%WUVQO] on the bottom left of the screen,
then select [Settings] on the screen to enter
Setting menu. Touch the icons on the left of
UETGGPVQUGNGEVECVGIQT[)GPGTCN6KOG
Sound, Display or Setup. To exit Setting
menu, touch [
] on the bottom left of the
screen.
General
5[UVGONCPIWCIGCPF$NWGVQQVJ84
language
Touch the button to the right of “System
language and Bluetooth VR language” to
UJQYNCPIWCIGNKUV5GNGEVFGUKTGFNCPIWCIG
touch [OK] to confirm, or touch [%CPEGN] to
GZKVYKVJQWVUCXKPI
0CXKICVKQP84NCPIWCIGUGVVKPI
Touch [Settings] button from navigation
menu.
Ŗ 6QWEJ=Regional] button from settings
menu.
Touch [2TQITCO.CPIWCIG] button.
Select desired language.
(When select a language, the navigation
U[UVGOYKNNTGUVCTV
Ŗ 6QWEJ=Sound and Warnings] button from
navigation menu.
Touch [8QKEG.CPIWCIG] button.
Select the same language(Voice language
CPF2TQITCO.CPIWCIG
(When select the TTS Voice, the
OKETQRJQPGKEQPYKNNCRRGCTUQPVJG
UETGGPCPFPCXKICVKQP84HWPEVKQPYKNN
YQTM
6. SYSTEM SETUP