Clarion NX702E User Manual

English
14
NX702E
Setup
Touch [Setup] on the right of screen to
spread the setting list. then touch the button
to the right of desired option to adjust or
show the sub-menu. Touch [Close] to close
the list.
AUX
• Input Aux Sense
Choose “Low”, “Middle“ or “High” input
sense of auxiliary device.
Bluetooth
• Bluetooth
Choose Bluetooth function on or off.
• TelephoneSpeaker
Choose Front Left or Front Right speaker
at telephone mode.
• ToneSelect
Touch [Auto] to use ringtones of your
mobile phone.
Touch [Internal] to use preset ringtone of
the unit.
• SoftwareUpdate
Update the software.
Camera
• CameraInterrupt
Choose [On], the screen will switch to rear
camera menu automatically when backing.
DVD
• MenuLanguage
Select menu language from list.
• AudioLanguage
Select audio language from list.
• SubtitleLanguage
Select subtitle language from list.
• SetPassword
To set password for parental control,
Touch [Set] to show password menu.
Input numbers by touching the digit and
[OK] buttons. Touch [X] button to delete a
digit inputted. Touch [Back] to exit.
• ParentalControl
Touch the button to the right of “Parental
Control” to show parental control menu.
Enter password, then select a parental
level. Touch [OK] to conrm or [Back] to
exit.
Navigation
• NavigationInterrupt
Select navigation interrupt On, Pop-Up or
Off.
• VoiceGuidance
ON: Interrupt function of voice guidance
is on. While interrupting no attenuate
function of AV sound.
MUTE: Interrupt function of voice guidance
is on. While interrupting attenuate function
of AV sound is on.
OFF: Interrupt function of voice guidance
is off. While interrupting no attenuate
function of AV sound.
Anti Theft
• AntiTheftcode
You can set an Anti-theft code. After set
successfully, when Battery wire reconnect,
you need to input the Anti-theft code.
1. Long press the [General] button until a
dialog box popped up. Touch [Yes] to set
a personal code of Anti-Theft.
2. Input a 4-digit code. Touch [OK] to conrm.
Then input it again for conrmation.
3. To remove the code, long press the
[Ge ner a l] button and input the old
password.
Note:
Please make a note of the Anti theft code not
to forget. if the right code is not inputted, it
becomes impossible to operate this unit.

Clarion NX702E Specifications

General

Brand	Clarion
Model	NX702E
Category	Car Video System
Language	English