Clarion NZ502E - 4. NZ502 E Button Functions; NAVI;AV and Eject Button Operations; Microphone and Reset Button Functions; AUX 1 Connector and Playback Control Buttons

37NZ502E
English
English
Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
•ConnectingtheparkingbrakecordtolampgroundallowsyoutowatchiPod/iPhonevideo/DVDvideo/AVinputwhen
theparkingbrakeisengaged.
•Whentheparkingbrakecordisnotconnected,themonitorwillnotshowanyvideosources.
•If“AUDIOONLY”appearsonthescreenjustafterturningontheACCpowerofthecar,releasetheparkingbrake
whileconrmingsafety,andthenengagetheparkingbrakeagain.
Connecting the accessories
• Connecting to the external amplier
Theexternalamplierscanbeconnectedtothe6channelRCAoutputconnections.Ensurethattheconnectors
are not grounded or shorted to prevent damage to the unit.
• Connecting to iPod/iPhone device
TheiPod/iPhonedevicecanbeconnectedtodedicatediPod/iPhoneconnectiononthemainunit.Fordetailed
information,refertotheinstructionsheetormanualfortheiPod/iPhonecable.
Note:
•ThisunitmaynotsupportallfunctionsofalliPod/iPhonedevices.
•TheiPod/iPhoneconnectionwillchargeyouriPod/iPhoneunlesstheiPod/iPhonebatteryiscompletelydepleted.If
the specified cord of the cellular phone is connected to the phone interrupt cord of the main unit, the audio mute is
activated when cellular phone in use.
Parkingbrakelamp
cord to battery
Electro-tap
Parkingbrake
signal cord
Parkingbrake
signal cord
Stopper
Parkingbrake
signal cord
Parkingbrake
Parkingbrakecord
(Grass-green)
Parkingbrakecord
(Grass-green)
How to attach the electro-tap
1.PlacetheParkingbrakecordatthestopper,and
fold it back in the direction of the arrow
2.PasstheParkingbrakesignalcordthrough,and
fold it back in the direction of the arrow.
NZ502E_quick start guide_120718.indd 37 2012-7-18 13:48:52