- C hoose the mounting location
where the unit will not interfere
with the normal driving function
of the driver.
- B efore finally installing the unit,
connect the wiring temporarily
and make sure it is all connected
up properly and the unit and
the system work properly.
- Use only the parts included
with the unit to ensure proper
installation. T he use of
unauthorized parts can
cause malfunctions.
- C onsult with your nearest
dealer if installation requires
the drilling of holes or other
modifications of the vehicle.
- Install the unit where it does
not get in the driver•s way and
cannot injure the passenger if
there is a sudden s top, like an
emergency stop.
- If installation angel exceeds
30
might not give its optimum
performance.
30
0
INS TAL L AT ION
Notes:
Avoid installing the unit where it
would be subject to high
temperature, such as from
direct sunlight, or from hot air,
from the heater, or where it
would be subject to dust, dirt or
excessive vibration.
DIN F R ONT /R E AR -MOUNT
This unit can be properly
installed either from “Front”
(conventional DIN F ront-mount)
or “R ear” (DIN R ear-mount
installation, utilizing threaded
screw holes at the sides of the
unit chass is). F or details, refer
to the following illustrated
installation methods.
41
To Next Page
Loading...
