. S ymptoms P ossible cause / remedy
P layer does not work when
switching on ignition and
press ing the P OWE R button.
The remote control does
not work.
S kips during DVD playback.
Distorted sound.F rozen picture.
Interference in picture.
P layer does not read disc at all.
P layer does not recognize the
inserted disc.
P layer hang-up (picture freezes ).
No F OLDE R /F ILE display when
playing an MP 3 disc.
Wrong language for audio, DVD
menu or subtitles is selected
when inserting a DV D.
C olor saturation is too
weak/strong during
DVD/V C D/S VC D playback.
C heck fuses (unit and vehicle) and connections
• P ress the R E S E T button (seepage 16).
C hange the batteries in the remote control.
• R eplace the batteries
The infrared lens on the remote or the unit
is covered by objects or dirty.
• C lean the infrared lenses with a damp cloth.
P layer cannot read the inserted disc due to disc
damage or dirt on the surface. C lean the disc
and attempt to replay.
Ins erted disc type is not compatible with the
player (see specifications).
In cold weather conditions, condensation may
occur on the las er.
• Wait approximately 5 minutes until the
condensation evaporates.
• S witch the player off and on to resume
normal operation.
• P ress the R E S E T button
S et S MAR T NAV option to: WIT H ME NU in the
preferences set-up menu.
C heck initial language s ettings in the
P R E F E R E NC E S set-up menu.
• R emove the disc.
• S et the required C OLOR value using the or
buttons and re-insert the disc.
R es et default value:
• With the disc removed, press the DIS P button.
To Next Page
