Basic Operation
Adjusting the fader
1.
Press A-M button
[IJ
and select "FAD".
2.
Turning the Rotary knob
rn
clockwise
emphasizes the sound from the front speak-
ers; turning it counterclockwise emphasizes
the sound from the rear speakers.
*The factory default setting is "0". (Adjustment
range:
F9
to R9)
3.
When the adjustment is complete, press A-M
button
[IJ
several times until the function
mode
is
reached.
Switching the Display
While pressing the BAND button
[]],
press the
DISP button
[H]
to enter the clock display mode.
Main display
-+
Clock display
-+
Main display
Setting the Clock
1)
While pressing the BAND button
[]],
press
the DISP button
[H]
to enter the clock display
mode.
2)
While pressing the BAND button
[]],
press
and hold the DISP button
[H]
for 2 seconds or
more. This enables the clock editing mode.
*The editable fields will be indicated when the dis-
play flashes.
3)
To
move between the hour and minute fields,
use the
Up
(hour) and Down (minute) buttons
OJ
4)
To
store the clock setting, press the BAND
button
[]].
Notes:
•
If
you select another operation mode before complet-
ing the above procedure, the clock setting operation
will be canceled.
• Removing the vehicle's battery for
a check
or
repair
will cause the clock
to
reset to 1:00.
Set
the clock
again
if
this happens.
Tape Operation
Loading Tapes
Insert the cassette tape into the Cassette inser-
tion slot with the side on which the tape is
exposed facing the right. Playback starts auto-
matically.
*When the end of the cassette tape is reached, the
auto reverse mechanism is activated and the other
side of the tape begins playing automatically.
Note:
• Fully insert the cassette tape into the cassette inser-
tion slot.
Listening to a tape which is already loaded
Press the FUNC button
[]]
to select the tape
mode. Playback begins automatically.
Ejecting Cassette Tapes
Press the Eject button
[ID.
The cassette tape
is
ejected.
*The radio mode is selected automatically 4 seconds
after ejecting the tape.
Fast-Forwarding
and
Rewinding
Use the FF button
~
and REW buttons
[1QJ.
FF
: Press this to fast-forward the tape.
REW
: Press this to rewind the tape.
*It is possible to listen to the radio during fast-forward,
rewind or search operations.
Switching to the Other Side
of
the
Tape
Press the PROG button
[TI]
both the FF button
~
and REW button
[1QJ
together at the same
time. Playback
is
switched automatically to the
other side of the cassette tape.
XA311
7
To Next Page
Loading...
Need help?
General
