4
XMA1
5.WIRED REMOTE CONTROL UNIT OPERATIONS
PWR / FUNC Button
1
Turning on and off the power
Press the PWR button 1 to turn the power on and press and hold it
for 1 second or longer to turn the power off.
Changing the operation mode
Each time the FUNC button 1 is pressed, the mode switches in the
following order:
■ XMA1 following operations are enabled by remote control with the Wired Remote Control Unit M101RC (sold separately).
WIRED REMOTE CONTROL UNIT
1 PWR (Power) Button
FUNC (Function) Button
2 VOLUME Up (w) / Down (z) Bbuttons
3 BAND Button [
]
PROG (Program) Button [
]
DISC Up Button [
]
4 Play/Pause (s) Button [
] Buttons
MUTE Button [
]
5 SEARCH Up(
) / Down ( ) Buttons
[
] : In Radio Mode
[
] : In Tape Mode
[
] : In CD Changer Mode
Play/Pause (
s
) / MUTE Button
4
Pause (in Tape mode or CD changer mode)
Press the Play/Pause button 4. Playback pauses. To resume play-
back, press the Play/Pause button 4 again.
Mute (in Radio mode)
Press the MUTE button 4. The sound is muted immediately. To can-
cel, press the MUTE button 4 again.
SEARCH Up ( ) / Down ( ) Buttons
5
Fast-Forwarding and Rewinding (In Tape mode)
Press SEARCH Up button 5 to fast-forward the tape.
Press SEARCH Down button 5 to rewind the tape.
APC (Auto Program Control) (In Tape mode)
Press SRCH Up button 5 twice to move ahead to the beginning of
the next selection.
Press SRCH Down button 5 twice to move back to the beginning of
the current selection.
* Pressing and holding the button for 1 second or longer will move forward or
backward 3 times faster than normal play, and pressing and holding it for 3
seconds or longer will do the operation 30 times faster.
Selecting tracks (in CD changer mode)
Press the SEARCH Up button 5 to start playback from the begin-
ning of the following track. Press the SEARCH Down button 5 to
start playback from the beginning of the current track. If pressed again,
the track moves to the previous one.
Fast-forward and fast-backward (in CD changer mode)
Press and hold the SERCH Up button 5 to fast-forward the disc.
Press and hold the SERCH Down button 5 to fast-backward the
disc.
Changing preset stations (in Radio mode)
Each time the SEARCH Up/Down buttons 5 are pressed, the pre-
set station switches in the following order:
1 ➜ 2 ➜ 3 ➜ 4 ➜ 5 ➜ 6 ➜ 1.....
or
6 ➜ 5 ➜ 4 ➜ 3 ➜ 2 ➜ 1 ➜ 6.....
Be careful about adjusting the volume, as turning on the power
while the volume is raised to its maximum may harm your hear-
ing.
CAUTION
Radio ➜ Tape ➜ CD changer
Notes:
• If the above equipment is not connected, corresponding mode
cannot be selected.
• In tape mode, if no cassette tape is loaded in XMA1, “CASS” flashes
on the display and the radio mode is selected.
VOLUME Up (
w
) / Down (
z
) Buttons
2
Adjusting the volume
Press the VOLUME Up button 2 to increase the volume and press
the VOLUME Down button 2 to decrease the volume.
BAND / PROG / DISC Up Button
3
Changing the band (in Radio mode)
Each time the BAND button 3 is pressed, the band switches in the
following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1.....
Switching the Program (direction of tape travel) (in Tape mode)
Press the PROG button 3. The tape starts playing in the opposite
direciton, and the tape travel indicators turn in the opposite direction.
Changing the disc (in CD changer mode)
Each time the DISC Up button 3 is pressed, the disc switches in the
following order:
1 ➜ 2 ➜ 3 ➜ 4 ➜ 5 ➜ 6 ➜ 1.....
To Next Page
Loading...
Need help?
General
