8
XMA1
CD Changer Operation
When a separately sold CD changer is connected, it can be con-
trolled from the source unit.
Notes:
• Some CDs recorded in CD-R mode may not be usable.
• Even when recorded in CD-RW mode, some CDs may not be us-
able.
Listening to the Disc
Press the FUNC button 2 and select the CD changer mode, then
the CD starts playing.
Stopping (pausing) Playback
Press the Play/Pause button !.
Press the Play/Pause button ! again to resume playback.
Selection of CDs
Press the Direct button 5 to select 1 to 6, then select the CD you
wish to play.
Selecting Tracks (songs)
Press the SRCH Left and Right buttons @.
d: Playback will start from the next track.
a: Playback will start from the beginning of the track currently
playing. When this button is pressed again, the CD will play
from the previous track.
Fast-Forward and Fast-Backward
Press and hold the SRCH Left and Right buttons @.
d: To fast-forward
a: To fast-backward
∗ Pressing the SRCH Left / Right button for 1 second or longer will move
forward or backward 5 times faster than normal play, and pressing it for 3
seconds or longer will do the operation 30 times faster.
Scan Play (Intro Music Scan)
Press the SCN button 6, then the display shows “SCN”, then the
CD will play the first 10 seconds of all the tracks of all CDs. Press the
SCN button 6 again to disengage the unit from scan play.
∗ A scan play will start from the track following the one currently playing.
Disc scan play
Press and hold the SCN button 6 for 2 seconds or longer, then the
display will show “
” and “SCN”, and plays the first 10 seconds
of the first tracks of all the CDs in the CD changer.
Press the SCN button 6 again to disengage the unit from disc play.
∗ A scan play will start from the first tracks of next CDs following the one
currently playing.
Repeat Play
Press the RPT button 7, then the display shows “RPT”, then the
track currently playing will be played repeatedly. Press the RPT but-
ton 7 again to disengage the unit from repeat play.
Disc repeat play
Press and hold the RPT button 7 for 2 seconds or longer, then the
display shows both the “
” and “RPT”, then the disc currently
being played will be played repeatedly.
Press the RPT button 7 again to disengage the unit from disc re-
peat play.
Random Play
Press the RDM button 8, then the display will show “RDM”, then
the entire tracks on the disc will be played at random.
Press the RDM button 8 again to disengage the unit from disc ran-
dom play.
Disc random playback
Press and hold the RDM button 8 for 2 seconds or longer, then the
display will show both the “
” and “RDM”, then the entire tracks
of all the discs in the CD changer will be played at random.
Press the RDM button 8 again to disengage the unit from disc play.
Switching Magazine
This function can be used only when the connected CD changer can
store a multiple number of magazines.
Every time the MAG button $ is pressed, the next magazine will be
selected.
To Next Page
Loading...
Need help?
General
