Clark TWLi20 - Page 56

56
Operator Settings
Operator Settings
Name Description Menu Operation
Password
Enable
If enabled, requires a password
to be entered before operating
the lift truck.
Adjust Password Enable
DISPLAY → PARAMETER SET →
PASSWORD ENABLE → OFF or ON
Charge
Soon Mode
Allows the technician to adjust
at what battery charge level
the initial hydraulic and travel
cutback occurs.
Adjust Charge Soon Mode
DISPLAY → PARAMETER SET → LA.
BAT LOW BDI% → 40% to 3%
Charge Now
Mode
Allows the technician to adjust
at what battery charge level
the nal hydraulic and travel
cutback occurs.
Adjust Password Enable
DISPLAY → PARAMETER SET → BMS
LOW BDI% → 30% to 3%
NOTE
For additional information regarding the specic use and operation of this display, refer to
the Service Manual.