74
Cleaning
Cleaning
Cleaning Rules
Always maintain a clean lift truck. Do not allow debris or contaminants to accumulate on the
lift truck. Clean any excess or leaking grease and oil before operating the lift truck. Before
attempting to clean the lift truck, all eorts to prevent shorting (arcing) of the electric circuits
must be completed.
Your specic operating environment determines the amount and extent of cleaning required
for your lift truck. For severe truck applications, frequent cleaning is required to allow for safe
and optimal lift truck operation.
• Disconnect the battery before cleaning the lift truck.
• Only use clean, dry low-pressure air and/or non-conductive, anti-static brushes to
clean electrical components.
• Clean the lift truck at least every PM interval.
• After cleaning, check all lift truck functions before returning to operation.
CAUTION
Per OSHA, when using compressed air to clean the lift truck, air pressure must not be
greater than 207 kPa (30 psi).
WARNING
Always wear appropriate eye protection when cleaning.
CAUTION
Do not use ammable solvents to clean the lift truck.
CAUTION
Do not use pressurized water to clean the lift truck.
To Next Page
Loading...
