Clark TWLi20 - Page 91

91
Section 8. Specications
TWLi20
Wheels and Tires
Solid Pneumatic
Model Drive Tire Size Dual Steer Tire Size
TWLi20 200x50–10 15x4.5-8
Recommended Fluids
Drive Axles
Hydraulic Tank
(Steer)
Hydraulic Tank
(Main)
Type SAE 80W-90 AW ISO 32 AW ISO 32
Capacity
0.35 L
(0.37 qt)
1
1.37 L
(1.4 qt)
17.3 - 19.3 L
(4.5 - 5.1 gal)
Specication API GL-5 CLARK MS-68
Part Number 1808014 1800236 (qt) OR 1802155 (gal)
1
Capacity is per drive axle.
Recommended Lubricants
Type Part Number Specication Component
CLARK Innerslide
Lubricant
886396 Upright Rails
CLARK Chain &
Cable Lubricant
886399 Lift Chains
NLGI #2 EP
General Purpose
Grease
VV608 CLARK MS-107C
Upright and Carriage Rollers, Tilt
Cylinder Ends, Upright Mounting
Pins, Steer Axle Hub Bearings
Operating Grade
Model
Maximum Operating Grade
(Loaded)
Maximum Operating Grade
(Unloaded)
% deg % deg
TWLi20 15 8.5 17 9.6
IMPORTANT!
The maximum operating grades shown below are based on lift trucks equipped with a
standard upright (STD) with a maximum fork height (MFH) of 3000 mm (118 in), standard
forks, and a standard weight battery.