5
English
Control Panel
1. [ LINE IN VOLUME ] Line-in volume control
2. [ MIC VOLUME ] Microphone volume control
3. [ TALK OVER ] Microphone volume prioritised in ON mode while AUX/Bluetooth
input is attenuated until themicrophone signal is discontinued. Volume then
returns to thepreset level. In OFF mode TALK OVER is deactivated.
4. MIC IN (Combo jack): Microphone input (Ø 6.3 mm jack plug with unbalanced
cable/XLR connector with balanced cable)
5. LINE IN: External audio source input (Ø 6.3 mm jack plug with unbalanced cable)
6. LINE IN: External audio source input (RCA)
7. REC OUT (RCA) for optimised recording to an external recording device.
This audio output is independent of the master volume control.
8. [ MASTER VOLUME ] Master volume control, ON/OFF switch
9. [ TONE ] Tone control
10. BATTERY: Internal battery level indicator
11. [ PAIR ] Bluetooth pairing button. Bluetooth LED connection indicator.
12. CHARGING: Charging indicator
13. [ BLUETOOTH VOLUME ] Bluetooth volume control
1
2
3
4
5 6 8
7
9 10
13
11
12
4. Connecting
Bluetooth connection
Please read theinstruction manual of thedevice you wish to connect before beginning.
You may use thedevice stand on top of thespeaker to hold your device.
1. Press [ PAIR ] (11) to activate Bluetooth mode.
2. The Bluetooth indicator (11) will begin flashing quickly and thespeaker will go into
search mode (scans for available Bluetooth devices).
3. Activate Bluetooth on thedevice to be connected.
4. A successful connection is established once theBluetooth indicator (11) reverts
to asteady and slow flash.
To Next Page
Loading...
Need help?
General
