8
English
B
A
Charging anexternal device via theUSB port
A. Connect your iPhone, iPad or other Apple product
directly to theUSB port (E) on thespeaker’s back
panel.
B. Use theincluded USB adaptor when charging non-
Apple smartphones, tablets or other similar products.
Note: Be aware that certain devices may not charge
even with theadaptor, especially some makes of
tablets.
The power cable must be connected to the AC power
source in order to use the USB charging function.
6. Care and maintenance
• Unplug themains lead before cleaning.
• Clean theproduct using asoft, moist cloth. Use amild detergent and never
use solvents or strong, abrasive cleaning agents for cleaning theproduct.
7. Troubleshooting
Problem Solution
No sound from thespeaker. • Make sure that theinput volume/s control used
(1), (2) or (13) is turned clockwise and is/are audible.
Also check that themaster volume (8) is on.
• The battery may be discharged. Check
thebattery status and connect themains lead
to anelectrical outlet.
• Make sure all connections are properly and
securely connected.
• If amicrophone is connected and TALK OVER
is activated, all other audio inputs are attenuated
while any signal is coming from themicrophone.
Try turning off theTALK OVER function.
8. Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.