CLAUSING MS1318M - Page 82

8-6!
!
TERMINATING THE USE OF THE MACHINE
Waste disposal:
When your machine can not work anymore, you should drain the oil from machine body. Please store
the oil in safe place with bottom tray. Ask a environment specialist to handle the oil. It can avoid soil
pollution. The oil list in machine:
x
Hydraulic oil
x
Cutting fluid
x
Drive wheel gear oil
OIL RECOMMENDATION FOR MAINTENANCE
Item
Method
Revolution
Suggest oil
Dovetail guide
Keep grease covered. Antirust.
Daily
Shell R2
Roller bearing
Sweep clean and oil with lubricant.
Daily
SAE #10
Bed roller / surface
Sweep clean and oil with lubricant.
Daily
SAE #10
Nipples of bearing
Use grease gun, but not excess.
Monthly
Shell R2
Blade tension device
Use grease gun, but not excess.
Monthly
Shell Alvania EP
Grease 2
,
Mobil Mobilplex
48
Reducer
Inspect once a week. Change oil of 600 hours of
using. Change it every year.
Regularly
Omala oil HD220
Mobil Gear 630
Hydraulic system
Inspect half a year. Change oil every year.
Regularly
Shell Tellus 32
Mobil DTE oil
Light Hydraulic 24
Bearing
Inserts
Oil with lubricant, but not excess.
Daily
Shell R2
Band wheel
Oil with lubricant, but not excess.
Weekly
Cylinder
Oil with lubricant, but not excess.
6 Monthly
Wire brush
Oil with lubricant, but not excess.
6 Monthly
1. Turn off the stop circuit breaker switch before servicing the machine.
2. Then post a sign to inform people that the machine is under maintenance.
3. Drain all of the cutting fluid and oil off and carefully treat them to avoid pollution.
4. The machine must be either LOCKED OUT OR TAGGED OUT while under maintenance.
MS1318M / MS1318SA