WTR-682 Menu Struc ture
Au dio Output
The Au dio Out put screen al lows the user to set the au dio
out-put to Mono (Add) or Ste reo (SEP). This op tion only ap --
plies to beltpacks with 5 pin head set con nec tors. This op tion
set ting does noth ing with a 4 pin head set con nec tor.
•
Press [MENU] four times from the group/chan nel screen
to ar rive at the au dio out put screen
•
Press [SET] to change the set ting. The op tion will start to
flash.
•
Use the [UP]/[DOWN] ar row but tons to change the au dio
out put op tion.
•
Press [SET] to end ed it ing and ac cept the set ting.
7-28
[SET]
[UP]/[DOWN]
END
Ab SEP
Ab SEP
Ab Add
[SET]
Ab Add
Au dio Output
To Next Page
Loading...
