ClearOne CHAT 60 - Update Firmware

Chapter 4: Using The CHAT Application
2211
UPDATE FIRMWARE
Clicking the
UUppddaattee FFiirrmmwwaarree
button displays the update firmware screen.
The
UUppddaattee FFiirrmmwwaarree
screen displays the current firmware version, unit name, and checks ClearOne's website
for available firmware and device database updates. Using
UUppddaattee FFiirrmmwwaarree,,
you can automatically update
the CHAT 60 with the most recent firmware and device database, or you can use the
SSeelleecctt FFiillee
button to
manually load an existing firmware file.
>
NNoottee
: The computer your CHAT 60 is connected to must be connected to the internet in order to use
the
CChheecckk ffoorr uuppddaatteess
option.
CChheecckk ffoorr UUppddaatteess ((AAuuttoommaattiicc UUppddaatteess))
Perform the following steps to automatically update your firmware and device database:
1. Click the
CChheecckk ffoorr uuppddaatteess
button to check the web for available updates.
2. The following series of messages appears below the progress bar:
• "Locating website..."
• "Website found"
• "Click Update to load new firmware into device" (Appears only if a new firmware file is available.)
• "Click Update to load new database information" (Appears only if a new device database file is
available.)
>
NNoottee
: If no new firmware or device database updates are available, then the following messages appear
below the progress bar:
• "Your device contains the most recent firmware"
• "Your database contains the most recent updates"
This indicates that your firmware and database are current. No updates are required.