ClearOne CONVERGE PRO 2 - Set Date and Time

TOUCH PANEL CONTROLLER
14
Set Date and Time
You can set the date and time on a Touch Panel Controller in the
following ways:
• You can have the Touch Panel Controller get the date and time from
a connected CONVERGE Pro 2 device
• If you are connected to a network via Wi-Fi or Ethernet, you can
have the Touch Panel Controller get the date and time and time
zone automatically via the network connection
• If the Touch Panel Controller is not connected to a network or if the
automatic date and time configuration isn’t working correctly, you
can manually set the date and time or time zone on the Touch Panel
Controller
To set the date and time using any of the above methods, follow these
steps:
1. Tap
.
2. Tap Date and Time.
The Date and Time screen appears: