CleaverBrooks Hawk 1000 - Section 7 Parts; PLC, I;O, HMI; ACTUATORS

www.cleaverbrooks.com
Section 7
Parts
PLC, I/O, HMI
ACTUATORS
Qty Part Number Description
1 880-06082-000 Hawk 1000 Kit - must be ordered as complete kit only
1 833-10039-000 PLC Processor
1 833-10040-000 4 Inch PV+ Compact Touch Screen with (118-04514-000 label included)
1 833-02842-000 Digital Input Module
1 833-02872-000 Relay Module
1 833-03099-000 Modbus Module SM2
2 826-00111-000 Ethernet Cable
1 832-02404-000 Power Supply120 Watt, (For PLC, PV + & Analog Inputs)
1 832-02037-000 Power Supply 50 Watt (For Modbus) Use 120 Watt for 50NM Actuator
1 848-01623-000 Centre 60x30x10, No Cut outs (Conversions uses a different size)
1 983-00083-000 6 Amp
1 836-00620-000 Qty 1 (add another if oil heater for #6 oil is required)
1 118-03173-000 4” x 16”
1 001-01476-000 Orion, OA109-12POT/DIN
1 817-00239-000 Alarm Bell
Qty Part Number Description
1 945-00259-000 Modbus FX04-1, 3 ft-lb (4 N-m)
(Use on Fuel and FGR valves, except in High Torque applications)
1 945-00260-000 Modbus FX20-1, 15 ft-lb (20 N-m)
(Use On Combustion Air Damper, except in High Torque applications)
1 945-00261-000 Modbus FX50-1, 37 ft-lb (50 N-m)
600” 826-00205-000 Cable, 5 conductor,18 AWG
826-00206-000 Connector, female, straight, 7/8” screw connection - Two required per actuator