Hawk 1000 Section 4 — System Configuration
Part No. 750-366 4-23
Figure 4-23. Aux inputs
4.4.9 Configuration Summary
Once the System Configuration settings have been entered the entries can be viewed from the System
Configuration Summary screens.
Note: The “Confirm Options” push button is only visible if this is a new system configuration or a system
configuration parameter marked with an asterisk has been changed.
Figure 4-24. Configuration summary
To complete system configuration, press the <Confirm Options> pushbutton on the Options Summary Screen.
The Configuration selections may be changed after the HAWK 1000 is installed. However, for many of the
options, additional hardware is required to make the function work. Please refer to the parts section for the
required hardware.
Page 1 Page 2
To Next Page
Loading...