CleaverBrooks Hawk 1000 - Introduction

Section 1 — General Hawk 1000
1-2 Part No. 750-366
1.1 Introduction
The Cleaver-Brooks HAWK 1000 is an exclusive Boiler Management and Control system specifically designed
to integrate the functions of a Programmable Boiler Controller and Burner Management Controller, as well as
other boiler operating and ancillary controls. The HAWK 1000 system incorporates a user-friendly, graphical
Human Machine Interface (HMI) that displays boiler parameters, fault annunciation and alarm history, as well
as providing access to boiler configuration and control functions.
Figure 1-1. Boiler Overview Screen
Figure 1-2. Typical Panel Layout