2 PL12EN-1001 2011-04 en00d441.fm, 07.04.2011
About this programming manual
This programming manual is the -- original programming manual -- and is intended for all persons who con-
figure settings on the mPro400GC controller.
The programming manual does the following:
• It provides important instructions for safe and effective operation.
• It describes the function and operation of the mPro400GC controller.
• It points out options.
The following documents provide additional information for the operation and service of the mPro400GC
controller.
Further information on complete software configuration is contained in the
• Parts manual, no. PL12-1000EN
• Quickstart, no. PL12-1004
• Recovery Installation
• System description, Fastening technology, no. P1730E
Disclaimer:
Cleco reserves the right to modify, supplement or improve this document or the product without prior notice.
This document may not be reproduced in whole or in part in any way, shape or form, or copied to another
natural or machine-readable language or to a data carrier, whether electronic, mechanical, optical or other-
wise, without the express permission of Cleco.
Symbols in the text:
italics Identifies menu items such as Diagnosis
> Identifies the selection of a menu item from the menu such as File > Print
<…> Identifies elements such as buttons, push button or external keyboard input, e. g. <F5>
Courier Identifies elements such as input fields, checkboxes, radio buttons or drop-down menus.
Indicates the name of paths and files, e. g. setup.exe
/ Separates the subdirectories of file paths, e. g. file/print
(OS9 operating system)
• Identifies lists
➔ Identifies instructions to be followed
To Next Page
Loading...
Need help?
General
