Cleco DGD mPro400GC User Manual

en03d441.fm, 07.04.2011 PL12EN-1001 2011-04 43
Programming
3
3.5.2 Oscilloscope
The Oscilloscope function displays a Torque curve after each complete rundown in the tightening direction.
The curve is colored in alternating red (pink) and blue lines to indicate the different stages. A green box is
also displayed on the trace to indicate the torque and angle limits. There is a data point for each degree of
angle rotation.
3.5.3 Archive
The Archive allows the user to display the last rundowns with automatic update after each new rundown.
3.6 Communications
3.6.1 Data Transmission
Fig. 3-14 Data Transmission
Serial and Ethernet communications can be configured.
c01239en.png

Cleco DGD mPro400GC Specifications

General

Brand	Cleco
Model	DGD mPro400GC
Category	Controller
Language	English