en01d441_bedingt.fm, 07.04.2011 PL12EN-1001 2011-01 5
Workplace safety symbols
Warning notes are identified by a signal word and a pictogram:
• The signal word describes the severity and the probability of the impending danger.
• The pictogram describes the type of danger.
Observe these notes and proceed with special care in the situations described. Pass all safety instructions
on to other operators. In addition to the safety instructions in these programming instructions, all local safety
and accident prevention rules must be observed.
WARNING!
Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION!
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or
property and environmental damage. If this warning is not observed, injuries, property or environmental
damage may occur.
This pictogram identifies all references to potential electrical shock, alerting of hazards to life
and health of personnel.
This sign warns of a possibly damaging situation.
If the note is not adhered to, the product or parts of it may be damaged.
NOTE
General notes
include application tips and useful information but no hazard warnings.
ATTENTION!
To Next Page
Loading...
Need help?
General
